Steelfiber
Aerotech Steelfiber FC90 .370" Graphite Iron Shafts
Aerotech Steelfiber FC90 .370" Graphite Iron Shafts
無法載入取貨服務供應情況
No two golfers are alike and no shaft is one-size-fits-all. The new SteelFiber FC ‘Flight Control’ graphite iron shafts combine the advanced composite technology of SteelFiber with variable tip stiffness for players who need higher trajectories. The new progressive tip design of the SteelFiber FC shafts delivers higher ball flight in the mid- and long irons while maintaining the classic SteelFiber launch in the scoring irons. Plus, like all SteelFiber shafts, the FC reduces the risk of injury, lessens aggravation of existing injuries and decreases player fatigue, all while delivering greater distance and accuracy.
The design of the SteelFiber FC90 is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.
Design & Technology
- Progressive tip stiffness delivers higher trajectory in mid- & long irons
- Enhanced feel through increased shaft load
- Over 59 miles of steel fiber covers the entire surface of each shaft
- Bend profile based on tour-winning SteelFiber i95
SteelFiber FC Iron Shaft Models
| SHAFT | FLEX | LENGTH | WEIGHT | TORQUE | TIP OD | BUTT OD | PARALLEL TIP | BEND POINT |
| SteelFiber fc70 | F4 | 42" | 75g | 3.2 | .370" | .600" | 7.5" | Progressive |
| SteelFiber fc70 | F3 | 42" | 75g | 3.3 | .370" | .600" | 7.5" | Progressive |
| SteelFiber fc70 | F2 | 42" | 75g | 3.5 | .370" | .600" | 7.5" | Progressive |
| SteelFiber fc80 | F4 | 42" | 85g | 2.9 | .370" | .600" | 7.5" | Progressive |
| SteelFiber fc80 | F3 | 42" | 85g | 3.0 | .370" | .600" | 7.5" | Progressive |
| SteelFiber fc90 | F4 | 42" | 95g | 2.8 | .370" | .600" | 7" | Progressive |
| SteelFiber fc90 | F3 | 42" | 95g | 2.9 | .370" | .600" | 7" | Progressive |
| SteelFiber fc90cw* | F4 | 40"- 36.5" | 90g | 2.9-2.4 | .355" | .600" | n/a | Progressive |
| SteelFiber fc90cw* | F3 | 40"- 36.5" | 90g | 3.1-2.6 | .355" | .600" | n/a | Progressive |
| SteelFiber fc115 | F5 | 42" | 115g | 2.8 | .370" | .600" | 7" | Progressive |
| SteelFiber fc115 | F4 | 42" | 115g | 2.9 | .370" | .600" | 7" | Progressive |
| SteelFiber fc115cw* | F5 | 40"- 36.5" | 115g | 2.7-2.2 | .355" | .600" | n/a | Progressive |
| SteelFiber fc115cw* | F4 | 40"- 36.5" | 115g | 2.8-2.3 | .355" | .600" | n/a | Progressive |
*Taper Tip cw-Constant Weight
SteelFiber fc Iron Shaft Tip Trimming Instructions:
| SHAFT | 1I* | 2I* | 3I* | 4I* | 5I* | 6I* | 7I* | 8I* | 9I* | PW* |
| SteelFiber fc70 | 0" | 0" | 0" | 5/8" | 1.25" | 1 7/8" | 2.5" | 3 1/8" | 3 3/4" | 4 3/8" |
| SteelFiber fc80 | 0" | 0" | 0" | 5/8" | 1.25" | 1 7/8" | 2.5" | 3 1/8" | 3 3/4" | 4 3/8" |
| SteelFiber fc90 | 0" | 0" | 0" | 5/8" | 1.25" | 1 7/8" | 2.5" | 3 1/8" | 3 3/4" | 4 3/8" |
| SteelFiber fc115 | 0" | 0" | 0" | 5/8" | 1.25" | 1 7/8" | 2.5" | 3 1/8" | 3 3/4" | 4 3/8" |
*All Taper Tip shafts (.355" tip) are Butt Trim Only
*Tip trim can be adjusted to fine tune playing characteristics.
*Tip trim should not exceed (Parallel Tip - Hosel Depth).
*Perform tip trim and then butt trim to final playing length.
